This browser does not support the video element.
★ Double circuit travel switch, widely used
★ Sturdy structure, composed of zinc alloy and reinforced plastic
★ Small size, waterproof and oil resistant
★ The built-in microswitch has a double spring structure design, resulting in a longer mechanical life
★ With significant OT movements
★ Easy wiring conduit design
★ Multiple types of actuators, convenient to use
| model | KJT | 3205 | 3208 | 3209 | 3212 | 3213 | 3214 | 3267 | 3268 | 3270 | 3289 |
| Operating force | OF（max） | 750gram-cm | 750gram-cm | 750gram-cm | 750gram-cm | 900gram-cm | 900gram-cm | 150gram | 150gram | 150gram | 550gram-cm |
| Resilience | RF（mix） | 100gram-cm | 100gram-cm | 100gram-cm | 200gram | 200gram | 200gram | 30gram | 30gram | 30gram | 100gram-cm |
| Front pre stroke | PT（max） | 20 | 20 | 20 | 1.8mm | 1.8mm | 1.8mm | 30mm | 30mm | 30mm | 20 |
| Trigger position | Target price（±10%） | 22.5° | 22.5° | 22.5° | 2.0mm | 2.0mm | 2.0mm | 22.5° | 22.5° | 22.5° | 22.5° |
| Travel resolution | MD（max） | 10 | 10 | 10 | 1.2mm | 1.2mm | 1.2m | 14 | 14 | 14 | 14 |
| Stroke after touch | OT（mix） | 75 | 75 | 75 | 4.0mm | 4.0mm | 4.0mm | 20mm | 20mm | 20mm | 75 |
| ccumulated total travel | TT（mix） | 95 | 95 | 95 | 5.8mm | 5.8mm | 5.8mm | 50mm | 50mm | 50mm | 95 |
| Double disconnect mechanical function | INO+INC force disconnection snap action forces the quick movement to disconnect |
| rated voltage/current rated voltage/current | 10（4）A，125，250VAC/6（2）A，380VAC Inductive load，余φ=0.4 |
| Contact resistance | initial<10mΩ，tested<30mΩ |
| insulation resistance | 100VDC min 500mΩ |
| Dielectric strength | AC 200VAC/minute，Used between bare metal/terminals, grounding, and opposite poles |
| Electrical lifespan | 500000 resistive at 10A 250VAC |
| mechanical life | 20,000,000 |
| Operating speed | 120 Sears per minute |
| Waterproof and dustproof ability | IP66 (anti pressure water column level) |
| Rising temperature | At rated voltage/current, up to 30 ° C throughout the entire ambient temperature range |
| come up to standard | CENELEC EN 50041，EN 50047，IEC 337-1，VDE 0660 |
| operate temperature | -25°C~+80°C |
| torage temperature | -25°C~+80°C |
| humidity | Maximum 95 ° relative humidity (no dew) |
| Impact coefficient, impact resistance | Free position 10G, overtravel position 30G |
| Vibration frequency | max 55Hz |
| Terminal screw torque | 6-8 kilograms per centimeter |
| Other screw torque | Lid 12-14 kg ft cm/Head 8-9 kg ft cm/Installation 50-60 kg ft cm/cm |
| Bare copper wire size Bare wire Ganges | φ2 max |
| Cable size Cable diameter | φ9 Maximum value (if using cable IP 66 φ 8-9) |